Phone: +90 850 307 48 25
Email: neovus@neovus.com.tr
Hours: Mon–Fri 9am–6pm

Rooftop Optimization

Adaptive Control System — Achieve 10-25% energy savings through economizer free cooling, intelligent capacity modulation, and night setback strategies for rooftop units.

RTU Adaptive Control

10-25%

Energy Savings

30-50%

Economizer Contribution

30-45%

Part-Load Gain

8-12%

Setback Savings

Optimization Strategies

Each can be implemented independently; together they deliver maximum savings.

01

Economizer (Free Cooling)

Uses outdoor air for free cooling when conditions are favorable. Enthalpy-based switchover compares outdoor vs. return air to maximize free cooling hours and eliminate unnecessary compressor operation.

30-50% of cooling hours can use free outdoor air
02

Capacity Modulation (2-Stage/Inverter)

Optimizes compressor staging and modulation to match actual load. 2-stage units run at low stage during partial load, while inverter-driven units continuously adjust capacity to eliminate on/off cycling losses.

30-45% efficiency gain at typical 40-60% partial load
03

Night Setback & Unoccupied Mode

Widens temperature deadband during unoccupied hours to reduce runtime. Optimal start algorithms pre-condition the space before occupancy, accounting for thermal mass and outdoor conditions.

8-12% savings from reduced unoccupied-hour runtime
BACnet MODBUS ASHRAE Compliant Title 24

Optimize Your Rooftop Units

Contact us for a custom rooftop unit optimization plan tailored to your facility.

Contact Us