Phone: +90 850 307 48 25
Email: neovus@neovus.com.tr
Hours: Mon–Fri 9am–6pm
Argus SCADA platform

Argus SCADA

Umbrella SCADA Platform

All Your Systems, One Platform

Argus SCADA is an integrated monitoring and control platform that unifies automation systems from different manufacturers and protocols under a single umbrella. Electrification, HVAC, lighting, fire detection and more — manage all your subsystems centrally with Argus.

Through inter-protocol integration, it enables data exchange between different infrastructures, increases operational efficiency and strengthens decision support mechanisms.

Argus SCADA responsive interface

PANOPTES — "The All-Seeing"

The Digital Legacy
of an Ancient Guardian

In Greek mythology, Argus Panoptes was a giant with a hundred eyes covering his entire body. Half of his eyes would sleep while the other half stayed awake — so nothing could ever escape his watch. The goddess Hera appointed him to guard her most precious possession, for Argus never fully sleeps, never loses focus.

This ancient story is the very essence of our modern SCADA philosophy. Just as Argus had a hundred eyes, Argus SCADA monitors every corner of your facility — every protocol, every sensor, every subsystem — 24/7 without interruption. One eye speaks BACnet while another listens to Modbus; one tracks the electrical grid while another watches the HVAC system.

Hundred Eyes
9+ Protocol Support

Each eye looks in a different direction — each protocol connects to a different subsystem

Half Always Awake
24/7 Uninterrupted Monitoring

Argus never sleeps — the SCADA system never goes down

Hera's Guardian
Your Facility's Guardian

Protects the most valuable asset — proactively defends your infrastructure

One-Bodied Giant
Unified Platform

All eyes unite in one body — all systems converge on one platform

"When Argus died, Hera placed his hundred eyes upon the tail of the peacock — so his gaze would endure for eternity. We carry that legacy into the digital world."

Wide Protocol Support

9+ Industrial Protocols, One Platform

Argus SCADA supports all common industrial communication protocols and enables inter-protocol integration.

BACnet IP/MSTP

Standard communication for building automation. Integration with HVAC, lighting and access control devices.

Modbus IP/RTU

Industrial automation protocol. Communication with energy analyzers, PLCs and field devices.

KNX IP

European standard building automation protocol. Widely used in lighting, blinds and HVAC control.

M-Bus

Meter reading protocol. Data collection from water, gas, heat and electricity meters.

IEC 60870-5-104

Energy sector telecontrol protocol. Used in electricity distribution networks and transformer substations.

IEC 61850

Power system communication standard. Integration with protection relays and automation devices.

DNP3

Distributed network protocol. Reliable communication for water treatment, energy distribution and SCADA applications.

OPC DA/UA

Industrial automation interoperability standard. Data sharing between different vendor software.

MQTT

IoT communication protocol. High-performance sensor and device data transmission over low bandwidth.

Umbrella SCADA Architecture

Inter-Protocol Integration

What is Umbrella SCADA?

Umbrella SCADA is a top-level SCADA architecture that enables monitoring and controlling all different subsystems (electrification, HVAC, fire detection, access control, etc.) from a single center, regardless of their individual protocols and manufacturers.

Data exchange between devices on different protocols
Monitor all subsystems from a single screen
Eliminate the need for protocol converter gateways
Cross-alarm correlation and centralized event management
Vendor-independent, scalable architecture
Supported Subsystems
Electrification IEC104 / IEC61850 / DNP3
HVAC BACnet / Modbus
Lighting KNX / DALI
Energy Monitoring Modbus / M-Bus
Fire Detection Modbus / BACnet
IoT Sensors MQTT / OPC-UA

Argus Modules

Areas of Expertise

Each module offers in-depth specialized monitoring and control capabilities in its domain.

Electrification SCADA

Monitoring and control of MV/LV electrical distribution systems through single-line diagrams. High-volume event recording and event-based monitoring system.

  • Single-line diagram visualization
  • High-capacity event recording
  • Analyzer data monitoring
Learn More

Asset Management

Equipment lifecycle tracking, availability analysis, maintenance planning and performance monitoring. Category-based equipment management.

  • Availability analysis
  • Maintenance calendar & reminders
  • Fault & performance tracking
Learn More

Plant Management

Chiller plant management, pump and cooling tower equalization program, COP efficiency control and capacity optimization.

  • Equalization & rotation
  • COP efficiency control
  • Capacity management
Learn More

HVAC Management

Central monitoring and control of AHU, exhaust fan, VRF, VAV and boiler systems. Communication via BACnet and Modbus protocols.

  • AHU & exhaust fan control
  • VRF & VAV management
  • Boiler system control
Learn More

Energy Monitoring

Electricity analyzer, water and gas meter monitoring, consumption analysis, cost reporting and carbon footprint tracking.

  • Real-time energy monitoring
  • Water & gas meter tracking
  • Cost & carbon analysis
Learn More

ECP — Emission Platform

Scope 1/2/3 emission calculation, GHG Protocol and ISO 14064 compliant reporting, carbon reduction target tracking and automated report generation.

  • Automated emission reporting
  • ISO 14064 & GHG compliance
  • SBTi target tracking
Learn More

Why Argus?

Features That Set Argus SCADA Apart

Inter-Protocol Integration

Read data from a BACnet device and write to a Modbus device. Bridge between KNX and M-Bus seamlessly.

High-Capacity Event Recording

Capability to record thousands of events per second. Historical event analysis and reporting.

Cross-Alarm Correlation

Correlate alarms from different subsystems and perform root cause analysis.

Web-Based Responsive Interface

Full functionality access from desktop, tablet and mobile devices.

Role-Based Authorization

Customizable access rights based on users and user groups.

Advanced Reporting

Automatic report generation and distribution by time, device and zone.

Contact for Argus SCADA

Make Your Facility Smarter with Argus SCADA

Contact us for a customized Argus SCADA demo and feasibility study for your facility.

Contact Us SCADA Solutions